Product IntroductionWidely used in the installation and maintenance of large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. Suitable for purification of insulating oil in transformers of 35KV-110KV-220KV. Dual-stage vacuum oil filter provides dehydration, degassing, precision multi-stage filtration, electric heating with constant temperature automatic control to ensure uniform heating and eliminate dead oil zones. It also offers vacuum pumping and vacuum oil injection functions and can perform ultimate vacuum extraction for transformers and GIS equipment.
Working principle and processAfter passing through the magnetic filter, oil enters the coarse filter heater for heating. Heated oil is drawn by the oil suction pump into a spiral spray atomization system to form a coarse oil fog in the reaction tower and vacuum separation chamber where moisture evaporates. The oil mist is separated; impurities, moisture, gases and light hydrocarbons are removed through multi-stage filtration and vacuum separation. Water vapour is condensed and collected; residual gases and air are discharged by vacuum pump after cooling. The system includes precision filtration to remove mechanical impurities and an oil exhaust pump to complete dehydration and degassing.
Oil quality indicators after insulating oil treatment (post-treatment indicators and test methods)1. Moisture content: none (test method: GB/T511)
2. Moisture content: ≤3 PPM (test method: GB/T7600)
3. Pressure resistance value: ≥65 KV (test standard: GB, DL or IEC standards)
4. Residual gas: ≤0.5% (gas content measurement methods per relevant GB, DL or IEC standards)
5. Acid value: 1 µm (as presented in source)
Product features- High vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology to efficiently remove water, dissolved micro water, free carbon and gases.
- Multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption for impurity removal; large filtration area, high pollutant holding capacity and high filtration accuracy (ß3 ≥ 1000).
- Compound three-in-one protection device with automatic protection for high/low oil levels, infrared bubble detection, level control, temperature control and pressure protection; high automation and reliable operation.
- Specifically suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance.
- Capable of online oil filtration and unmanned operation; operation status indicated by indicator lights.
- Humanized design: low noise, simple operation, long maintenance intervals, low energy consumption and operational cost savings.
Function of Two-Stage Vacuum Oil FilterThe machine provides high-efficiency dehydration, degassing, filtration and drying of transformer insulating oil. Main components: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet. The machine frame and connections are manufactured to avoid welding defects, burrs or rust; surface treated with plastic spraying for smooth and bright finish. The unit is designed for filtration, purification and regeneration to remove moisture, gas and mechanical impurities from insulating oil.
Technical parametersItem | Unit | Spec
Model | - | SY/ZD-RM-150
Volume of flow | L/min | 150
L/H | L/H | 8000-10000 (Variable frequency adjustable)
Temperature control range | ℃ | 0~100
Working temperature | ℃ | 20~60
Extreme vacuum | pa | ≤20
Working vacuum degree | Mpa | -0.06~-0.099
Gas content in oil | % | ≤0.1
Work pressure | Mpa | ≤0.5
Filtration accuracy | µm | ≤1
Water content in oil | ppm | ≤3
Oil breakdown voltage | KV | ≥65
Heating power | KW | 72
Total power | KW | 80
Power supply | - | Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter | mm | 50
Continuous working hours | H | ≥800
Trouble-free working hours | H | ≥8600
Caractéristiques / spécifications techniques- Model: SY/ZD-RM-150
- Flow rate: 150 L/min (8000-10000 L/h, variable frequency adjustable)
- Temperature control range: 0–100 ℃; Working temperature: 20–60 ℃
- Extreme vacuum: ≤20 pa; Working vacuum: -0.06 to -0.099 Mpa
- Gas content in oil: ≤0.1%; Water content after treatment: ≤3 ppm
- Filtration accuracy: ≤1 µm; Filtration technology: multi-stage polymer mesh + magnetic electrostatic adsorption (ß3 ≥ 1000)
- Oil breakdown voltage after treatment: ≥65 KV
- Heating power: 72 KW; Total power: 80 KW
- Power supply: Three-phase five-wire 380V 50Hz
- Inlet/outlet pipe diameter: 50 mm
- Continuous working hours: ≥800 H; Trouble-free working hours: ≥8600 H