Markierprägung BIG

BIG SERIES HOT MARKERS – FOR PLASTIC, LEATHER AND WOODHot stamping irons are used for permanent marking of materials such as wood, PVC, ABS, plastic, leather, etc. They are available in various sizes and thicknesses to better adapt to the material to be marked and can reach a maximum temperature of 400–450 °C. Depending on the type of material to be stamped, it is advisable to adjust the thickness of the stamp to make the marking more or less legible. For example, lower power is sufficient for balsa wood, while higher power is required for rough or particularly hard woods or for leather. The time required to apply the stamp is usually about 2-3 seconds and allows you to obtain a clearly defined mark without burning.The BIG series consists of high-performance markers:- Models with a single handle and plate from 100 x 50 mm to 150 x 80 mm- Double handle models with plate from 200 x 50 mm to 350 x 50 mm.The indicated price already includes:- Neutral brass plate- Creation of graphic files- Customization (engraving) of the brass plate using a numerically controlled machineAfter ordering, you will be contacted by our staff to decide together on the best customization solution.MODELHandlePowerPower supplyPlateFP15.10.50Single450 W230 V100x50 mmFP15.15.50 per pressSingle450 W230 V100x50 mmFP15.20.100Single1150 W230 V150x100 mmFP15.30.50Single600 W230 V150x50 mmFP15.35.50 per pressSingle600 W230 V150x50 mmFP15.40.80Single1000 W230 V150x80 mmFP15.50.50Double800 W230 V200x50 mmFP15.55.50 per pressDouble800 W230 V200x50 mmFP15.60.80Double1200 W230 V200x80 mmFP15.70.100Double1400 W230 V200x100 mmFP15.80.100Double1600 W230 V250x100 mmFP15.90.50Double1000 W230 V250x50 mmFP16.00.80Double1350 W230 V250x80 mmFP16.10.50Double1200 W230 V300x50 mmFP16.20.80Double1500 W230 V300x80 mmFP16.30.50Double1400 W230 V350x50 mm*The models FP15.15.50, FP15.35.50 and FP15.55.50 can only be used with the bench press for vertical marking.For customization, it is necessary to provide us with image files compatible with the dimensions of the chosen plate. It is recommended to avoid inserting very small details or writing in particularly elaborate fonts that could be lost in the marking.OPTIONAL- Power regulator- Additional rectangular plates- Lever press for vertical markingMaximum temperature: 400–450 °CMarking time: approx. 2-3 secondsMaterials: wood, PVC, ABS, plastic, leatherSingle and double handle modelsCustomizable brass plate includedPower supply: 230 VPower: 450 W to 1600 W depending on modelPlate sizes: 100x50 mm up to 350x50 mm